C.S.DIESEL
  D M Plants

 

PORTABLE DM PLANT

Suitable up tp 800 PPM TDS
The system comprises of a 2-stage deionoiser, with 2 stages of filtration prior to demineralisation
In the first of filtration, the water passes through a sand filter, where suspended solids are removed.

The next stage of filtration is the Activated filter, where organic matter and free chlorine present in water are absorbed or removed.Filtered water then passes through a series of Cation Exchanger
and Action Exchanger to produce demineralised water.

The Four Bed Deionisers come in two models CI 20 and CI 60, both of which, are highly effective for making DM water, when inlet water Tds level is below 800 PPM.

the system is ideal for demineralisation water for the primary circuit of the engine Cooling System.
SPECIAL FEATURES

  • Pre-assembled on strong corrosion resistant steel frame.
  • Complete with regeneration equipment.
  • Mild steel, powder coated panel holding a conductivity meter, electrical switch and multi
    valve control block.
  • continuous monitoring quality of treated water
  • Provision of mounting a small feed water pump on the skid.

 

The coolant used in a cooling syatem is a mixture of
water and corrosion inhibitor. It is important that high
high quality water which is free from suspended matters and dissolved solids is used in coolant. Cummins now provides the best option to get good quality engine water-in protable Demineralization (DM) Systems and Reverse Osmosis (RO) System, Which ensures better performance and increased enmgine life.

 

Cummins Engine and Spares and Services | Heat Recovery Unit | Accoustic Encolsures | Gensents on Hire | D M Plants
Valvoline Oil | Dataloging | Solutions | Upgrade Kits

 

Home | About Us | Product | Custome Care | Achievements | Location

Home